Newbie Question about Tint and ClearBra

Discuss anything MiNi related!

Postby scuzzlepook » Thu May 14, 2009 3:37 pm

bonehead04 wrote:
scuzzlepook wrote:Ultra Shield of Phoenix (they also go by Protective Film Solutions)
They are located near the Scottsdale Airpark (not too far from Mini North Scottsdale). I dealt with Ryan and he can be reached at 602-694-6979.

They do the clearbra install and have recently added window tinting to their business. Really nice guys, been happy with them. My boyfriend had his GP clearbra install done by them as well & was happy with the outcome.

These guys are the ones that MNS and all of those other dealerships located near MNS use. I'd go through them directly; that way you will not be paying any dealer mark-up's by getting the dealership involved.

(They do have the door handle protection that you ask about available - just had mine done a few weeks ago)


Any idea if they can do full hood coverage? Hate the bra line and this should eliminate the possibility of uneven fading(....I hope)


Not sure if they do, but wouldn't be suprised.
Give them a call! :)
Jet Black 2009 BMW 135i
first love: IB/W 2004 MCS; Second love AB/AB 2007 JCW MCS
Image Image
scuzzlepook
DMC Member
DMC Member
 
Posts: 1244
Joined: Sun Sep 03, 2006 12:48 am
Location: Mile high

Postby azminiman » Thu May 14, 2009 3:45 pm

bonehead04 wrote:
scuzzlepook wrote:Ultra Shield of Phoenix (they also go by Protective Film Solutions)
They are located near the Scottsdale Airpark (not too far from Mini North Scottsdale). I dealt with Ryan and he can be reached at 602-694-6979.

They do the clearbra install and have recently added window tinting to their business. Really nice guys, been happy with them. My boyfriend had his GP clearbra install done by them as well & was happy with the outcome.

These guys are the ones that MNS and all of those other dealerships located near MNS use. I'd go through them directly; that way you will not be paying any dealer mark-up's by getting the dealership involved.

(They do have the door handle protection that you ask about available - just had mine done a few weeks ago)


Any idea if they can do full hood coverage? Hate the bra line and this should eliminate the possibility of uneven fading(....I hope)



They do custom installs.. so I dont see why they wouldnt. Plus, as they say.. $$ will bet you almost anything..
[b]Former DMC founding member, 1st new MINI owner in AZ, 10 time AMVIV, 3 time MITM, 3 time MTTS, 2 time MINI United England-France. Visitor to 80 MINI dealers in US, 10 Canadian, and 6 European countries.[/b]
User avatar
azminiman
DMC Member
DMC Member
 
Posts: 1755
Joined: Mon May 03, 2004 5:50 pm

Postby bonehead04 » Thu May 14, 2009 5:12 pm

azminiman wrote:
bonehead04 wrote:
scuzzlepook wrote:Ultra Shield of Phoenix (they also go by Protective Film Solutions)
They are located near the Scottsdale Airpark (not too far from Mini North Scottsdale). I dealt with Ryan and he can be reached at 602-694-6979.

They do the clearbra install and have recently added window tinting to their business. Really nice guys, been happy with them. My boyfriend had his GP clearbra install done by them as well & was happy with the outcome.

These guys are the ones that MNS and all of those other dealerships located near MNS use. I'd go through them directly; that way you will not be paying any dealer mark-up's by getting the dealership involved.

(They do have the door handle protection that you ask about available - just had mine done a few weeks ago)


Any idea if they can do full hood coverage? Hate the bra line and this should eliminate the possibility of uneven fading(....I hope)



They do custom installs.. so I dont see why they wouldnt. Plus, as they say.. $$ will bet you almost anything..


I guess a better question would be can they do a good job at a full hood bra? As you said, $$$ can pay for virtually anything but doesn't necessarily get you a quality install.
bonehead04
 
Posts: 34
Joined: Mon May 11, 2009 2:46 pm
Location: Phoenix

Postby azminiman » Fri May 15, 2009 6:31 am

I guess the better honest answer would be.. I dont know. I havnt seen a full hood clear bra job from them.. ( or anyone actually ) But I can answer by saying this place has done 5 of our cars.. never a issue. While doing my last one.. they were doing a lambo, Bentley, and a carrera GT.. they all looked good too..
[b]Former DMC founding member, 1st new MINI owner in AZ, 10 time AMVIV, 3 time MITM, 3 time MTTS, 2 time MINI United England-France. Visitor to 80 MINI dealers in US, 10 Canadian, and 6 European countries.[/b]
User avatar
azminiman
DMC Member
DMC Member
 
Posts: 1755
Joined: Mon May 03, 2004 5:50 pm

Postby OPC » Fri May 15, 2009 4:38 pm

bonehead04 wrote: I guess a better question would be can they do a good job at a full hood bra? As you said, $$$ can pay for virtually anything but doesn't necessarily get you a quality install.


The question to ask the vendor is if the clear bra vinyl is available in sheets large enough to cover the bonnet. Otherwise you're looking at a multi-piece layup. I know opaque vinyl is available for a full wrap of a MINI like Mike @ AC did, but I don't think that's the same material as the clear bras.
Jos
OPC
 
Posts: 593
Joined: Sat Jul 19, 2008 12:37 am
Location: Chandler

Postby phxsteele » Fri May 15, 2009 10:13 pm

Im pretty sure the material is large enough. My brother had the whole hood of his GTR done and it looks great. I believe it is the same place that did my MINI. Airpart Auto Detail. In scottsdale. The guys name is Ryan. I inquired about the whole hood on mine and they said they could do it but i just had the front 20" or so done on the hood due to cost. They said it was expensive for the labor for the whole hood install with the complex curves.
phxsteele
 
Posts: 264
Joined: Tue Jun 24, 2008 3:13 pm

Postby azminiman » Fri May 15, 2009 11:39 pm

thats the same place we use
[b]Former DMC founding member, 1st new MINI owner in AZ, 10 time AMVIV, 3 time MITM, 3 time MTTS, 2 time MINI United England-France. Visitor to 80 MINI dealers in US, 10 Canadian, and 6 European countries.[/b]
User avatar
azminiman
DMC Member
DMC Member
 
Posts: 1755
Joined: Mon May 03, 2004 5:50 pm

Re: Newbie Question about Tint and ClearBra

Postby MiniBot » Sat May 30, 2009 10:40 pm

danjmcs wrote:They guy most of us use in the Phoenix area is Mark, 602-230-TINT (8468). He's done numerous DMC members cars with great results. He's a mobile installer, but I don't believe outside of the valley.


Thanks so much for posting this, Dan. Mark just finished tinting the windows on my new mini this morning, and he did a great job for a very reasonable price. And what a talker!!! :)
MiniBot
 
Posts: 170
Joined: Tue Aug 12, 2008 11:42 pm
Location: North Central Phoenix

Re: Newbie Question about Tint and ClearBra

Postby bonehead04 » Sat May 30, 2009 10:43 pm

MiniBot wrote:
danjmcs wrote:They guy most of us use in the Phoenix area is Mark, 602-230-TINT (8468). He's done numerous DMC members cars with great results. He's a mobile installer, but I don't believe outside of the valley.


Thanks so much for posting this, Dan. Mark just finished tinting the windows on my new mini this morning, and he did a great job for a very reasonable price. And what a talker!!! :)


What kind of tint did you get? Which windows did you do? What does he offer? Do you mind PM'ing me the price so I have a ballpark figure.

I was driving today and I cussin' up a storm b/c the sun was blazing down on my left side all morning. :x
Need to get some tint ASAP!
bonehead04
 
Posts: 34
Joined: Mon May 11, 2009 2:46 pm
Location: Phoenix

Re: Newbie Question about Tint and ClearBra

Postby Luckiee's Son » Sun May 31, 2009 7:15 am

bonehead04 wrote:
MiniBot wrote:
danjmcs wrote:They guy most of us use in the Phoenix area is Mark, 602-230-TINT (8468). He's done numerous DMC members cars with great results. He's a mobile installer, but I don't believe outside of the valley.


Thanks so much for posting this, Dan. Mark just finished tinting the windows on my new mini this morning, and he did a great job for a very reasonable price. And what a talker!!! :)


What kind of tint did you get? Which windows did you do? What does he offer? Do you mind PM'ing me the price so I have a ballpark figure.

I was driving today and I cussin' up a storm b/c the sun was blazing down on my left side all morning. :x
Need to get some tint ASAP!

LOL at your screen name! :D (In a good way) :wink:
Image
User avatar
Luckiee's Son
 
Posts: 716
Joined: Mon Jul 28, 2008 5:59 pm
Location: Mesa, Arizona, United States, Earth, Universe

Previous

Return to General Board

Who is online

Users browsing this forum: No registered users and 3 guests

cron